Tasmota
Basic Switch
- Connect a button to the two pins furthest from the on-board button.
- In the web config, set the module GPIO14 Sensor to "09 Switch 1"
- Using the console, set the switch to be a button with
switchmode 3
Equipment Settings
- Make sure relays stay off after a power outage with
PowerOnState 0
MQTT
Decent Clients are:
Host: hassio.home.cylindric.net
Username: mqtt
Password: chocolatemqtt
Specific configs
Tasmo01 - Christmas Tree
- 172.29.14.103
- Module > Type = Sonoff Basic (1)
- Wifi -> Hostname = tasmo01
- MQTT -> Host = 172.29.14.116
- MQTT -> Port = 1883
- MQTT -> Client = Tasmota02
- MQTT -> User = mqtt
- MQTT -> Password = chocolatemqtt
- MQTT -> Topic = tasmota01
- Other -> Friend Name 1 = Tasmota01
Make sure to set setoption19 1
in the console
Tasmo02 - Snowman
- 172.29.14.106
- Module > Type = Sonoff Basic (1)
- Wifi -> Hostname = tasmo02
- MQTT -> Host = 172.29.14.116
- MQTT -> Port = 1883
- MQTT -> Client = Tasmota02
- MQTT -> User = mqtt
- MQTT -> Password = chocolatemqtt
- MQTT -> Topic = tasmota02
- Other -> Friend Name 1 = Tasmota02
Make sure to set setoption19 1
in the console
Tasmo04 - Window
- 172.29.14.104
- Module > Type = Sonoff Basic (1)
- Wifi -> Hostname = tasmo04
- MQTT -> Host = 172.29.14.116
- MQTT -> Port = 1883
- MQTT -> Client = Tasmota04
- MQTT -> User = mqtt
- MQTT -> Password = chocolatemqtt
- MQTT -> Topic = tasmota04
- Other -> Friend Name 1 = Tasmota04
Make sure to set setoption19 1
in the console